Everyday Guidebooks
Cover of Water Tank Guide to Safe Siting

Preparedness & Self-Reliance

Water Tank Guide to Safe Siting

How to Evaluate Loads, Access, Temperature and Drainage Before You Install an Emergency Water Tank

by Todd Michael

Available now

A full water tank is heavy, and the most convenient-looking location may not be the safest. Before you buy or install an emergency tank, take a closer look at where it will stand and what that location demands.

Water Tank Guide to Safe Siting walks homeowners through a practical comparison of possible sites, from garages and utility areas to outdoor pads. Learn how to identify load-bearing questions, check delivery and maintenance access, recognize temperature exposure, and consider where spills or drainage might go. Use the included comparison tools to record observations, spot missing information, and prepare focused questions for qualified professionals.

This water tank guide also explains why local rules matter and how to make a useful inquiry before installation. It does not substitute for an engineer, installer, or local authority. Instead, it helps you approach those conversations informed, organized, and ready to make a better siting decision.

Contents
  1. 1. Start With the Site, Not the Tank
  2. 2. Map Your Candidate Locations
  3. 3. Understand the Weight of a Full Tank
  4. 4. Floors, Slabs and Ground Support
  5. 5. Delivery and Placement Access
  6. 6. Room to Inspect, Maintain and Replace
  7. Start With the Tank You Expect to Use
  8. Look at Every Side, Including Above
  9. Follow the Fittings
  10. Make Inspection Practical
  11. Plan for the Actual Maintenance Task
  12. Distinguish Clear Space From Borrowed Space
  13. Work Backward From Replacement Day
  14. A Close Fit: An Example
  15. Questions to Send With Your Site Sketch
  16. Update Your Candidate-Site Notes
  17. 7. Temperature, Sun and Seasonal Exposure
  18. 8. Spills, Overflow and Drainage
  19. 9. Indoor Site Trade-Offs
  20. 10. Outdoor Site Trade-Offs
  21. 11. Check Local Rules Before Committing
  22. Start With the Actual Proposal
  23. Find the Offices That Handle Each Question
  24. Ask About Permits Before Assuming You Are Exempt
  25. Clarify Setbacks and Property Boundaries
  26. Describe Water Movement, Not Just Tank Placement
  27. Explain the Plumbing Connection Clearly
  28. Keep a Written Inquiry Record
  29. A Sample Inquiry You Can Adapt
  30. Recheck the Answer When the Plan Changes
  31. Use the Answers to Refine Your Short List
  32. 12. Prepare for Professional Conversations
  33. 13. Compare Sites and Make a Conditional Choice
  34. 14. Your Pre-Installation Siting Checklist
  35. Other Books by Todd Michael

Read a sample: 1. Start With the Site, Not the Tank

A large water tank can look like a straightforward answer to an unsettling question: What would your household do if water stopped coming from the tap?

The picture is appealing. Choose a tank, have it delivered, fill it, and put a valuable reserve between your family and the next interruption. But before any of that, the tank needs a place to stand. That place must do more than accommodate its shape. It must support the filled tank, allow people and equipment to reach it, expose it to manageable conditions, and provide a reasonable plan for water that escapes or must be drained.

The best-looking space is not always the best site. An empty corner of a garage may have room for a tank but no practical route to its lid. A sheltered basement may be protected from summer sun but difficult to reach through a narrow stairway. A level-looking patch beside the house may put a leak on a path toward the foundation.

These are not reasons to abandon the idea of an emergency water tank. They are reasons to begin with the property rather than a product listing.

This chapter will help you define what you want the tank to do, identify the main questions a site must answer, and understand where your own observations should give way to qualified advice. The goal is not to make you an engineer or a plumber. It is to help you become a well-prepared homeowner who can ask better questions before money is committed or installation begins.

Start by describing the role the tank is intended to play. “Emergency water” can mean several different things, and those differences affect the type of tank, the equipment, and the location you will consider.

You might want a reserve for drinking and cooking during a temporary interruption. You might be more concerned about flushing toilets or carrying out basic cleaning. You may want water available for several purposes but plan to keep drinking water separate from water intended for other uses.

Write down the intended uses before choosing a location. A simple statement is enough to begin:

> We want an aboveground reserve that can be accessed during a water-service interruption, with water intended for household drinking and basic hygiene.

That statement is not a complete design. It does, however, raise useful questions. How will the water enter the tank? How will it be kept suitable for its intended use? How will the household draw it out? Will the system depend on electricity? Who will inspect and maintain it?

If drinking is one of the intended uses, discuss the tank material, water source, connections, treatment or rotation practices, and maintenance with the manufacturer and appropriate qualified professionals. A container’s advertised capacity does not establish that the entire setup is appropriate for drinking water. Nor should a homeowner assume that a connection to household plumbing can be made without safeguards against contamination or without checking applicable requirements.

You do not need every answer today. You do need to recognize that a site has to serve the planned system, not merely hold the tank.

A tank is the most visible part of a water-storage arrangement, but it is rarely the only part that needs room or support. Depending on the design, there may also be a base, valves, pipes, hoses, a pump, electrical equipment, an overflow, a drain, protective coverings, or an enclosure.

Even a relatively simple tank needs a way to be filled and a way to get water out. It also needs access for inspection and eventual cleaning or replacement. Those activities can be awkward if the tank is wedged tightly against walls or installed where a person cannot reach its openings.

Consider a homeowner who measures an open rectangle in a utility room and finds that a prospective tank’s listed dimensions will fit. That is a useful first observation, but it leaves many questions unanswered:

- Can the tank actually be carried or moved into the room? - Is there space to connect the fill and outlet fittings? - Can the lid be opened and the interior inspected? - What supports the floor beneath the tank? - Where would a leak travel? - Could the tank be removed if it needed replacement?

A “yes” to the first question—there is enough visible floor area—is only the beginning. A site-first decision considers the tank’s whole working life, from delivery through removal.

You may be tempted to settle on an exact capacity immediately. It is more useful at this stage to identify a preliminary range and remain willing to revise it.

Think about the number of people the reserve is meant to serve, the uses you listed, and the interruption you are preparing for. Also consider whether you already have other stored water or expect to use more than one container. Your household’s circumstances will shape the answer; this book does not prescribe one tank size for every property.

The amount of water matters because it affects nearly every siting question. A larger tank may require more floor area, a stronger support arrangement, a wider delivery route, or more involved drainage planning. A smaller tank may be easier to place but may not provide the reserve you had in mind.

There can also be a difference between the capacity printed on a product page and the amount of water you actually plan to store. For early screening,…

More Preparedness & Self-Reliance

Cover of The Everyday Prepper's Underground RefugeThe Everyday Prepper's Underground RefugeAvailable nowCover of The Expiration-Date ResetThe Expiration-Date ResetAvailable nowCover of A Place Above the WaterlineA Place Above the WaterlineAvailable nowCover of Food Storage Guidelines for Restaurants During DisruptionsFood Storage Guidelines for Restaurants During DisruptionsAvailable nowCover of Survival WaterSurvival WaterAvailable nowCover of Prepper Supplies for Accessible EvacuationPrepper Supplies for Accessible EvacuationAvailable now

About Todd Michael

Todd Michael is an American author and the founder of ToddMichael.tv. He writes practical, plain-English books on money, health, preparedness, technology, games, humor and more.

About the author Todd Michael · Todd Michael’s author site

Part of the ToddMichael.tv network.