Read a sample: 1. Know Your Tiny House
A tiny house can feel wonderfully simple: one room within reach of another, fewer possessions to manage, and less space to clean. Behind that simplicity, though, is a working home. Water arrives and leaves. Electricity powers lights and appliances. The roof sheds rain, the walls resist weather, and some combination of fans, windows, and heating or cooling equipment helps keep the interior comfortable.
The first maintenance task is not to fix anything. It is to learn what you have.
A few hours spent mapping your home can save a great deal of confusion later. When a drip appears beneath the sink, you will know where the water can be shut off. When a window begins to stick, you will have a picture of how it looked when it worked normally. When you call a service professional, you will be able to describe the equipment and explain how to reach it.
This chapter will help you create a practical guide to your particular tiny house. It does not need to be a blueprint. A hand-drawn floor plan, a few photographs, and a short list of systems are enough to begin.
Choose a time when you can move around the house without rushing. Bring a notebook or phone, a flashlight, and a tape measure. Open ordinary doors and access hatches that are meant to be opened by occupants. Look inside cabinets, beneath sinks, around appliances, and at the outside of the home.
Make a rough sketch of the floor plan. Mark the kitchen, bathroom, sleeping areas, doors, and windows. Then add the features that make the house work: plumbing fixtures, appliances, vents, detectors, and the main points where utilities enter or leave.
Your sketch does not need exact measurements or architectural symbols. A simple rectangle labeled “water heater” is more useful than a beautifully drawn plan that you never finish. If your house has a loft, draw a second small plan for it. If important equipment sits outside or underneath the home, add an exterior view or a separate note.
As you explore, use one rule throughout this chapter: observe what is accessible, note anything you cannot identify, and leave unfamiliar or inaccessible components alone. If a condition looks hazardous, or if identifying it would require dismantling equipment, arrange for an appropriate qualified professional to assess it.
You are building a reference, not taking an exam. It is perfectly acceptable for the first version to contain unanswered questions.
The shell is the part of the house that separates indoors from outdoors: the roof, exterior walls, floor, doors, and windows. Knowing its basic construction helps you interpret changes later.
Start at the top. Note the roof’s general shape, visible covering, and drainage path. Does rain run toward gutters, or does it fall directly from the roof edge? Are there visible roof penetrations, such as a plumbing vent or an appliance vent? Record what you can see safely from the ground; this first inventory does not require a trip onto the roof.
Next, look at the exterior walls. Identify the visible siding or cladding if you can, along with trim, vents, exterior lights, and places where pipes or cables enter. Notice how the bottom of the wall meets the foundation, skirting, or trailer. Inside, mark windows and exterior doors on your sketch, including any that open only partway because of furniture or built-in features.
Try to learn what lies behind the finished surfaces. Builder documents may describe wall framing, insulation, roof construction, and the layers used to manage air and water. You do not need to memorize every material. A short description such as “wood-framed walls with a metal roof, according to builder’s documents” gives you a useful starting point.
Pay particular attention to areas where materials meet: roof edges, window frames, door thresholds, and joints between exterior finishes. These locations are useful landmarks when you inspect for weather damage in spring or investigate a leak later. For now, simply photograph their visible condition and note any existing stains, gaps, or repairs.
Inside, look for access panels. A removable panel might conceal a plumbing connection, the back of a shower valve, or another service area. Mark its location and what it is intended to provide access to, if known. Also note large areas that cannot be inspected without opening finished walls, floors, or ceilings. Knowing the limits of visibility is part of understanding the house.
A tiny house may sit on a permanent foundation, on a trailer, or on another support arrangement. The distinction matters because movement, moisture exposure, utility connections, and service access can differ.
For a stationary home, identify the type of foundation or supports from the plans, builder, or a previous inspection. Note whether there is a crawlspace, a slab, piers, or another arrangement, and where any access opening is located. From a safe, accessible position, observe the surrounding grade and where surface water appears likely to go. Record drainage features and the location of any exterior utility connections.
For a home on wheels, include the trailer in your map. Note the visible frame, hitch, wheels, tires, and any stabilizing or support equipment. Identify where the home connects to water, electricity, and wastewater, and whether those connections would need attention before a move. If the trailer or support system has identifying information or maintenance instructions, keep those with the house records.
A home on wheels is not automatically ready to travel…